PEER ASSESSMENT MARK

Salam,

For all students Mechanical Engineering Design I & II, please submitted your peer assessment form to lecturer office together with your final report.  Those who are not yet completed the form please download it at i-learn. A copy of attachment all read uploaded to the web through announcement page. If you all not submitted this form may affected your individual mark about 5%.

Ribbon Mixer

This ribbon mixer is good mechanism for mixing, granulation and homogenizing process.  It can be used for some range of applications such as powder and fiber, including free flowing to cohesive and moist  material.

This design is very sturdy and robust. It  is consists of a conical Vessel with flat head. The agitator shaft located on the center is driven from top end with gear reducer. A double helical ribbon agitator in the vessel moves the product upward along the outer wall and releases it downward into cavities developed in the middle, simultaneously material is horizontally distributed by the mixing arm and is optimally homogenized.

Mixing time is depending on the agitator speed. The drive and bearings are kept outside of the vessel, no gears or seals in the product compartment. The rotating central agitator shaft does not have bottom bearing support there by eliminating any dead spots or difficult areas to clean and there is no danger of product contamination. Discharge of the product is fast and simple as full bore open.

 

For detail of concept design refer to  

http://www.rajprocess.com/mixers.html#conica-blender

DESIGN I: STUDENT SHOULD FOCUS ON DESIGN ANALYSIS

Today some of students from mechanical engineering  design I class presented the final project presentation to the panel.  They are presenting the project with their own way of presentation skill.  Most of students have presented their good presentation skill.  

They are really prepared and have capability to explain the project clearly to panel and audience. Very few of them still cannot avoid to read direct information from white board or screen and not turning the face to the audience.  In term of content, some of presenter not focus on design analysis, while this part is the important content in the design project.  Hopefully, this correction can be put inside the final report and past to lecturer by coming Friday 29th October 2010.   

ASSESSMENTS: 55 MARKS OF DESIGN II ALREADY PAST

21st October 2010,  Mechanical Engineering Design II student had past their 55 percent of total marks, only another 45 percent of the marks is not yet evaluated.  Most of student look enjoy and happy with the result.  So far the highest group only get their 44 percent of 55% provided marks, and the lowest is about 31%.  About 10%  to 25% of the marks already fly with the air, please give your time to improve final project report, minute of meeting and logbook.  Finally, please sincerely assess your friends as per provided rubric form and send the copy to your lecturer for peer assessment evaluation.  At the same time please make use your study week to prepare your self for other subjects.

Assessment

Course Work               :      100%

Progress Reports20% (Minutes of meetings, individual activities log and direct observation, Peer Assessment  5%, Final Report 20% , Progress/ Final Presentations  : 20% ,and  Product Assessment  35%                                                        

Technical Manager, try brief the panel on the functionality of the product and the right side the responsibility of project CEO to introduce the product to panel.  Sure, the hope is the panel will understand  and satisfy with their information. Good Luck, may Allah blessing your all. Insya'Alah.

Congratulations: MEC532 & KJM613 Students

 Alhamdulillah all the students MEC532 & KJM613 Semester July-November 2010 have completed second stage of assessment after passed through progress presentation in last month.  The entire student groups have participated acceptably in final presentation.  Most of them can deliver their project presentation very well with some comments from panel.  As a student they should take comments as lesson for future practices whether in FYP or other time. Thank you all the panels.  They should appreciate task given by the group as CEO, Technical Manager, Production Manager, Marketing Manager and Finance & Admin Manager as specially facing with the panel.

CEO and Members Present Project 



SCHEDULE FOR FYP2 STUDENTS

As reminder to all FYP2 students please aware with provided scheduled date, if you are strictly must comply to schedule, those who are fail to deliver may affect your final result.

1. Submission of FYP2 draft report to supervisor    15 Oct 10
2. Submission of final report to supervisor and second examiner         5 Nov 10
3. Student poster presentation        15 Nov 10
4. Submission of FYP2 marks (supervisor/ second examiner and presentation panels)        15 Nov 10
5. Submission of hard cover report (student)        26 Nov 10

FINAL REPORT & PRESENTATION FOR MEC531

We are already at the end of class for semester July - November 2010 and the students should submit final report and project presentation.  The schedule for submit the final report and project presentation are on 22nd October 2010

FINAL REPORT CONTENTS FOR KJM613 AND MEC532

Final Report Content for Design II should be consider to report on following item;

1.0              Introduction

2.0              Literature Review

3.0              Reevaluation , Reselection Of Product And Refinement Of Blue Print ( Should Included Engineering Analysis)

4.0              Acquiring Of Materials.

5.0              Tests Of Workability Of Parts

6.0              Fabrication, Assembly, Test And Inspection

7.0              Discussion And Conclusion

8.0              References/Citations

EVALUATION & REPORT SCHEDULE FOR KJM613 AND MEC532



FINAL PRESENTATION

 18^TH October 2010 8.3017-00 (MON.)

GROUPS	ROOMS	EVALUATORS
Nor Fazli-EMD7M4A(7)	B3-A10-1/2	Nor Fazli Mohd Asri & Bibi Intan Suraya
Prof Rahman- EMD7M8A(6)	B3-A10-3/4	Mohd Azahan,  Ahmad Khushairy & Nor Amilina N
Razali- EMB6PL(5)	B3-A10-5/6	Razali Hassan Mohamad Mazwan & Umi Kalsom
Razali-EMD7M2A(6)	B3-A10-7/8	Mohd Hanif Mat, Alias & Dr. Koay
Razali-EMD7M6A(7)	B3-A11-1/2	Mohd Faizal Mohd Shahriman & Noor Leha
PM Khalid- EMD7M3A(7)	B3-A11-3/4	Mohd Khalid , Mohd Afzan, & Mohd Hanif Ramli
PM Khalid- EMD7M7A(6)	B3-A11-5/6	Mohd Azzeim Wan Sulaiman & Ahmad Faiz
Prof Dahalan- EMD7M1A(7)	B3-A11-7/8	Nur Salbiah Hafizan Hashim & Adam Tan
Prof Dahalan- EMD7M5A(6)	B3-A11-13/14	Izdihar T Rahani A Rahman & M. Fairuz
Prof Dahalan-EMD7M9A(6)	B3-A11-15/16	Mohd Nor Azmi Patar  Muhd Azimin A Ghani& Hafizi Lukman

PRODUCT EVALUATION

21^st Oct. 2010 (THU.)

MECHANICAL ENGINEERING WORKSHOP

8.30-17-00

	Groups	Evaluators
1	EMD7M4A-Fazli (7)	Nor Fazli, Mohd Asri & Bibi Intan Suraya
2	EMD7M8A-Prof Rahman (6)	Mohd Hanif Mat, Alias & Dr. Koay
3	EMD7M1A-Prof Dahalan (7)	Mohd Azahan,  Ahmad Khushairy & Nor Amilina N
4	EMD7M5A-Prof Dahalan (6)	Mohd Faizal, Mohd Shahriman & Noor Leha
5	EMD7M9A-Prof Dahalan (6)	Mohd Azzeim,  Wan Sulaiman & Ahmad Faiz
6	EMD7M3A-PM Khalid (7)	Mohd Nor Azmi Patar, Muhd Azimin A Ghani & Hafizi Lukman
7	EMD7M7A-PM Khalid(6)	Mohd Khalid , Mohd Afzan, & Mohd Hanif Ramli
8	EMB6PL-Razali (5)	Nur Salbiah, Hafizan Hashim & Adam Tan
9	EMD7M2A-Razali (6)	Razali Hassan, Mohamad Mazwan & Umi Kalsom
10	EMD7M6A-Razali (7)	Izdihar T, Rahani A Rahman & M. Fairuz

SUBMISSION OF REPORT

5^TH NOV. 2010 (FRI.)